Mount The Camera; Installation Tips; Install The Camera - Reolink Rp-Pct8Md Bedienungsanleitung

Mount the Camera

Installation Tips

• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result
in poor image quality because of the window glare by infrared LEDs,
ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a
well-lit area. Or, it may result in poor image quality. To ensure best
image quality, the lighting condition for both the camera and the
capture object shall be the same.
• To ensure better image quality, it's recommended to clean the
lens with a soft cloth from time to time.
• Make sure the power ports are not directly exposed to water or
moisture and not blocked by dirt or other elements.
• With IP waterproof ratings, the camera can work properly under
conditions like rain and snow. However, it doesn't mean the camera
can work underwater.
• Do not install the camera at places where rain and snow can hit
the lens directly.
Drill holes in accordance with the mounting hole template.
NOTE: Use the drywall anchors included in the package if needed.
7 English

Install the Camera

1
A
2
A
B
1
3
First, push the mounting plate
backward, then lift it upward to
remove it.
Drill holes in accordance with the
mounting hole template.
For wall mounting, ensure the arrow
on the plate is pointing upward.
NOTE: Use the drywall anchors
included in the package if needed.
Arrange the tail wire through the
wire hole, aligning the hole with the
protruding part of the mounting
plate, then insert it into the camera
and secure it with the latch.
Secure the camera and mounting
plate together with screws on both
sides of the camera, and then put in
the silicone plugs.
English 8