Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection Diagram
Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an Ethernet cable.
2. Connect the NVR to your router, and then power on the NVR.
NOTE: The camera should be powered with a 12V DC adapter or a PoE powering
device such as PoE injector, PoE switch or Reolink NVR (not included in the
package).
Power Adapter
Camera
Reolink NVR*
OFF
ON
AUDIO
DC 48V
OUT
USB
HDMI
* You may also connect the camera to a PoE switch or PoE injector.
5
English
Router
1
3
5
7
eSATA
VGA
LAN
2
4
6
8
Ethernet Cable
Ethernet Cable
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the onscreen
instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client
NOTE:
• If you are connecting the PoE camera to a Reolink PoE NVR, please set up the
camera via the NVR interface.
English
6
Werbung
