Reolink FE-P Bedienungsanleitung Seite 4

Connection Diagram
Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a Reolink NVR (not included) with an Ethernet cable.
2. Connect the NVR to your router, and then power on the NVR.
NOTE: The camera can be powered via a PoE powering device such as PoE injector,
PoE switch or Reolink NVR (not included in the package).
Power Adapter
Camera
Reolink NVR*
OFF ON
AUDIO
DC 48V OUT USB HDMI
* The camera can also be powered via a 12V DC adapter (not included in the package).
5 English
Router
1 3 5 7
eSATA
VGA LAN 2 4 6 8
Ethernet Cable
Set up the Camera
Download and Launch the Reolink App or Client software, and follow the onscreen
instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App &
Client.
NOTE:
• If you are connecting the PoE camera to a Reolink PoE NVR, please set up the
camera via the NVR interface.
English 6