Connection Diagram; Set Up The Camera - Reolink RLC-810WA Bedienungsanleitung

Connection Diagram

Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Power on the camera with a power adapter.
Network Cable
Router
5 English
WiFi IP Camera
Power Adapter
Power Cable

Set up the Camera

Download and Launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
NOTE: You can now use WiFi instead of the Ethernet cable for network
connection.
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support
> App & Client.
NOTE: If you are connecting the camera to a Reolink PoE NVR,
please set up the camera via the NVR interface.
English 6