Program Auto Flash (The Basics) - Sony HVL-MT24AM Bedienungsanleitung

Program auto flash (The basics)

The procedure for P mode, including subject program selection, is the same as that
for A or M mode, except that the aperture is set automatically.
1
Set the POWER switch of the camera to ON and select P
mode.
2
Press the flash ON/OFF button to turn on flash-ON lamp on
the control panel.
3
Focus your subject and check the magnification ratio.
4
Select the flash.
5
When the macro flash controller is charged, press the
shutter button to take a photo.
0