Inserting Batteries - Sony HVL-MT24AM Bedienungsanleitung

Inserting batteries

The HVL-MT24AM may be powered by :
* Batteries are not supplied.
 Four AA-size alkaline batteries
 Four AA-size lithium batteries
 Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Always ensure that rechargeable nickel-metal hydride batteries are charged in
the specified charger unit.
1
Open the battery-chamber door as shown.
2
Insert the batteries in the battery chamber as in the
diagram.
3
Close the battery-chamber door.
 Follow the reverse steps when opening the battery-chamber door.
 The lamp on the control panel comes on. If it does not come on, press the flash
ON/OFF button.
Continued on the next page
11