Notes On Use - Sony HVL-MT24AM Bedienungsanleitung

Notes on use

While shooting
 This flash unit generates strong light, so it should not be used directly in front of
the eyes.
Batteries
 Do not store the macro flash controller with the alkaline batteries inside it.
Leakage from the batteries may damage the battery chamber.
 Depending on the temperature or storage conditions, the battery level displayed
may be lower than the actual battery capacity. The displayed battery level is
restored to the correct value after the flash has been used a few times. When
lamp blinks to indicate that the flash cannot be used, pressing the flash
ON/OFF button a number of times may result in restoration of the correct
battery level display. If the battery level is still not restored, replace the battery.
 When using lithium batteries, if the batteries become hot due to high
temperature or continuous use,
work for a while. Wait for the batteries to cool down before using the flash again.
 Nickel-metal hydride batteries can lose power suddenly. If
blinking or the flash can no longer be used while taking pictures, change or
recharge the batteries.
 The flash frequency and number of flashes provided by new batteries may
vary from the values shown in the table, depending on the time elapsed since
manufacture of the batteries.
lamp may blink and the flash may not
Continued on the next page
lamp starts