Parts And Components; Before Use - Cecotec Fast&Furious 5040 Absolute Bedienungsanleitung

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Steam knob
2. Steam shot button
3. Spray button
4. Temperature indicator light
5. 360º swivel cord
6. Temperature-control dial
7. Water tank
8. Soleplate
9. Water spray outlet
10. Water tank cap
11. Self-cleaning button
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This appliance comes in a packaging designed to protect it during transport. Take the
appliance out of its box and remove all packaging materials. You can keep the original box
and other packaging materials in a safe place to prevent damage to the appliance if you
need to transport it in the future. If you wish to dispose of the original packaging, make
sure all items are recycled properly.
- Check that all parts and components are included and in good condition. If any of them
are missing or damaged, please contact Cecotec's Official Technical Support Service
immediately.
- Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
- Place the appliance on an even, heat-resistant surface. Do not place the appliance near
heat sources, places with high humidity levels, or combustible materials.
- Plug the appliance into an appropriate wall outlet. The plug must be easily accessible to
disconnect it quickly in case of an emergency.
Note:
You may notice a slight burning smell or smoke when using the appliance for the first time,
caused by the excess of lubricants from the manufacturing process. Ensure good ventilation
and let the appliance work until no odour or smoke can be noticed.
44
IRONHERO 2600 FORCE