Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the equipment
or battery charger, and stop use.
CAUTION
1.
If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2.
If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
SPECIFICATIONS
POWER TOOL
Model
No-load speed (Low/High)
Wood
(Thickness 18mm)
Drilling
Metal
Capacity
(Thickness 1.6mm)
Machine screw
Driving
Wood screw
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains
the accessories listed in the table below.
1 Plus driver bit (No. 2 × 65L) ........... 1
2 Charger .................................................. 1
3 Plastic case ............................................ 1
DS14DSFL
4 Battery .................................................... 2
DS18DSFL
(DS14DSFL : BSL1415)
(DS18DSFL : BSL1815)
5 Battery cover ......................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BSL1415)
(For DS14DSFL)
2. Battery (BSL1815)
(For DS18DSFL)
Optional accessories are subject to change without
notice.
9
DS14DSFL
0 – 450 / 0 – 1250 min
30 mm
Steel: 12 mm
6 mm
6.0 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1415 Li-ion 14.4 V (1.5 Ah 4 cells)
1.5 kg
UC18YGSL
14.4 – 18V
0.4 kg
3.
If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal
of lithium ion battery, the battery may be shorted,
causing fire. . When storing the lithium ion battery,
obey surely the rules of following contents.
Do not place conductive debris, nail and wires
such as iron wire and copper wire in the storage
case.
To prevent shorting from occurring, load the
battery in the tool or insert securely the battery
cover for storing until the ventilator is not seen
(See Fig. 1).
–1
6.8 mm (diameter) × 50 mm (length)
BSL1815 Li-ion 18 V (1.5 Ah 5 cells)
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals.
Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch
to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red.
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it
contacts the bottom of the charger and checking
the polarities as shown in Fig. 3, 4.
DS18DSFL
–1
0 – 450 / 0 – 1250 min
38 mm
Steel: 13 mm
6 mm
(Requires a pilot hole)
1.7 kg
Werbung
Inhaltsverzeichnis
