Replacing The Bulb - Vevor Rtd-23A Bedienungsanleitung

REPLACING THE BULB

1. Tum OFF the unit.
2. Unplug the cord from the outlet.
3. Remove all the screws on the back panel and open the back panel.
4. You can see the Glass Fibre after opening the back panel. See Fig. 1.
5. Take out the Glass Fibre back, you can see the position of the lamp.
See Fig. 2.
6. Unplug both lines. See Fig. 3.
7. Loosen the screws on the small box (the screws are connected to the
inside of the liner and can be screwed out from the inside of the liner). See
Fig. 4a & 4b.
7