VEVOR RTD-23A Bedienungsanleitung Seite 7

7. If desired, press the UV button to turn on EPA-registered UV sterilization
system. The indicator near the switch will be on to show that the UV light is
working. Wait 30 minutes for the sterilization process to complete.
8. Whenever you want to open the door, please first turn off the power with
the indicator light off. Stay a safe distance from the cabinet door opening to
avoid being burned by high-temperature steam from the cabinet. Remove
towels with tongs or heat-resistant gloves.
9. Towels may be too hot to apply immediately, and caution should be
used before applying to the face or body.
MAINTENANCE
1. Turn OFF the unit.
2. Unplug the cord from the outlet.
3. Wait for contents to cool before handling. Contents may be hot. Remove
the wire basket and towels. Set the wire basket aside to dry.
4. With a soft cloth, wipe down the internal surfaces. Do not use harsh
chemicals or abrasives. To clean exterior, use a soft cloth and mild soap.
5. Pull the drip tray forward and empty contents. Set the drip tray aside to
dry.
6