Before Operation - Vevor Rtd-23A Bedienungsanleitung

Be sure to remove all packing material before use.

Place the unit on a well-ventilated, flat, sturdy surface away from heat

sources. The unit should not be used in the immediate vicinity of water
(such as bathtubs, washbowls, etc.) where the likelihood of immersion
may occur. Keep at least 30mm away from walls and other objects.
Plug cord into a power outlet.

Remove the wire basket and set aside.

1. Please fold or roll up the damp or pre-moistened towels but not soaked
ones into the wire basket of hot towel warmer. Try to wring out the water
several times to shorten the heating time.
2. 100% cotton dry towels could be put as well but not any other cloths
which couldn't bear this high temperature, and keep it within less than 2
hours heating. Please keep the towel away from the inner wall of warmer.
3. Do not overload the wire basket or directly place towels into the towel
warmer.
4. Close the door firmly and press the Power button to turn on. The
indicator near the switch will be on to show that the towel cabinet has
started heating.
5. It will take approximately 1.5 to 2.5 hours, depending on the number of
towels placed inside the cabinet. While keeping the cabinet door closed,
the temperature inside the cabinet will rise to the set temperature and will
automatically remain at this temperature. Do not open the cabinet door
while the towels are being heated.
6. When you want to add more towels, simply press the power button. The
heating process will restart. When the temperature reaches the limit, the
thermostat will automatically stop working. You can rest assured to keep it
in the on position.

BEFORE OPERATION

OPERATION
5