Before Using For The First Time; When The Work Is Done - Bosch BHS2 Gebrauchsanleitung

en
Fold out picture pages.

Before using for the first time

1
Figure
Connect the hand grip to the vacuum cleaner so that you
hear it engage and the lower power cord hook can be
fitted.
The cord must be routed through the recess on the side
of the hand grip as otherwise it may be damaged.
! Caution: once the hand grip has been engaged, it
cannot be removed from the vacuum cleaner.
2
Figure
Fit the lower power cord hook onto the vacuum cleaner.
3
Figure
Insert the hand-held vacuum cleaner into the connecting
piece of the floor tool.
Setting up
4
Figure
To quickly release the power cord, turn the upper power
cord hook downwards.
5
Figure
Plug in the vacuum cleaner.
Switch the vacuum cleaner on/off
at the switch.
6
Figure
The suction can be varied by turning the rotary control.
7
Figure
On models with an electronics module, the suction can
also be regulated by the combined power controller and
on/off switch.
18
Vacuuming
8
Figure
Adjusting the floor tool:
Move the switch on the floor tool to:
for vacuuming rugs/carpets
for vacuuming hard floors such as parquet,
floorboards, tiles, etc.
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
9
Figure
Vacuuming with accessories*
Crevice nozzle
For cleaning crevices and corners.

When the work is done

10
Figure
Unplug the vacuum cleaner.
Wind the power cord around the power cord hooks on
the back of the vacuum cleaner.
11
Figure
a) The vacuum cleaner can be carried by the carrying
handle.
b) To store the vacuum cleaner, it can be hung up by the
hand grip or propped up securely against the wall using
the parking stopper.
Changing the dust bag and filters
Replacing the dust bag
If the vacuum cleaner's suction decreases noticeably, the
dust bag must be replaced.
12
Figure
Open the lid in the direction of the arrow and remove it
from the appliance.