Packaging And Disposal; Service And Replacement Parts; Inspection Plan - Hailo Master P80 Gebrauchsanleitung

9. Care, maintenance and
preventive maintenance
NOTE – Caution, damage!
Incorrect handling of the ladder during care and maintenance
may lead to damage to the ladder.
• The ladder must be checked regularly for damages. The function
of moving parts must be ensured.
• Repairs and maintenance shall be carried out by a competent
person and be in accordance with the producer's instructions.
NOTE: A competent person is someone who has the skills to
carry out repairs or maintenance, e.g. by a training by the
manufacturer.
• For repair and replacement of parts, e.g. feet, if necessary
contact the producer or distributor.

10. Packaging and disposal

WARNING – Risk of suffocation!
Packaging material is not a children's toy; there is a risk
of suffocation.
• If the ladder is scrapped, it must be disposed of in accordance
with current legislations and regulations in the country of use.
• The product must not be disposed of in domestic waste.
• All components, including packaging must be sorted and separa-
ted accordingly.
• Aluminium is a high-grade material and should be put into the
recycling system.
• Your municipality can give you detailed information about this.

11. Service and replacement parts

You can find these instructions for use on the
internet at www.hailo.de.
HAILO-Werk Daimlerstr. 8
•
Tel.: +49(0)2773 82-0 Fax: +49(0)2773 82-1239
•
E-mail: info@hailo.de www.hailo.de
•
- 22 -
35708 Haiger, Germany
•

12. Inspection plan

During the regular inspection of the ladder, inspection points 1- 7
should be taken into account. If any of the tested points cannot
be fully satisfied, you should NOT use the ladder.
Regular inspection by a qualified person is required for
commercial use.
(Overview of the inspection items [illustration], see page 7)
1. General inspection points
Are there any contaminants (e.g., dirt, mud, paint, oil or grease)
on the ladder?
All fastenings (rivets, screws, bolts, etc.) must be completely
present.
Are any fastenings possibly loose or corroded?
2. Ladder side, ladder steps
Are ladder sides and reinforcement strips possibly bent,
curved, twisted, dented, torn, corroded or rotten?
All ladder steps must be completely present.
Are ladder steps possibly worn out, loose, corroded or damaged?
3. Platform, joints, hinges
Check the function, strength and completeness as well as for
damage and corrosion.
4. Ladder feet
Check feet for stability, wear and signs of damage.
All ladder feet must be present.
5. Safety braces
Are there any damages or cracks visible on the tensioning
rope?
Are the attachment points in good condition?
6. Safety rail, storage tray, transport roller
Are damage or cracks present?
7. Ladder labels
Are all labels present and perfectly legible?
- 23 -
Technical modifications reserved.
en