Mounting The Infant Carrier Adaptors; Mounting And Removing A Kiddy Infant Carrier - KIDDY evocity1 Bedienungsanleitung

Do the same on the opposite side.
WARNING
Ensure both locking devices are engaged before
use!

5.2 Mounting the infant carrier adaptors

Insert both adaptors into the channels on the travelsystem adaptors (fig. 19).
WARNING
Ensure both locking devices are engaged before
use!

5.3 Mounting and removing a KIDDY infant carrier

WARNING
Make sure that your child is secured in the infant
carrier as described in it's operating manual.
Attach the infant carrier rearward facing to the adaptors (fig. 20). Ensure that the
Infant carrier will be locked noticeable at both adaptors. Push at both sides the
shell downwards (fig.20; no.1) Try to lift up the handle (fig.20; no.2) to check if
both sides are locked proper at the adaptors.
Push and hold both buttons on either side of the infant carrier handle
(fig. 21; no. 1).
Push the handle forward until the handle buttons lock in place (fig. 21; no. 2).
WARNING
Ensure before using that the adaptors and the
infant carrier are engaged!
EN
34 34