Specifications - Makita DUB142 Betriebsanleitung

ENGLISH (Original instructions)
1. Red part
2. Button
3. Battery cartridge
4. Pointers

SPECIFICATIONS

Capacities
No load speed (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........................ Take particular care and attention.
........... Read instruction manual.
............ Keep a hand away from rotating
parts.
..................... Danger; be aware of thrown objects.
..................... Keep bystanders away.
..................... Wear eye and ear protection.
..................... Do not expose to moisture.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and
waste batteries and accumulators
and their implementation in
accordance with national laws,
electric equipment and battery pack
that have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Explanation of general view
5. Air volume adjusting dial
6. Switch trigger
7. Nozzle
8. Blower outlet
Model
Air pressure (water column)
Air volume
-1
)
Net weight
DUB142
D.C. 14.4 V
Intended use
END012-3
The tool is intended for blowing dust.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
9. Dust bag
10. Suction inlet
11. Fastener
0 - 550 mm
3
0 - 2.6 m /min
0 - 18,000
509 mm
1.6 kg
DUB182
1.7 kg
D.C. 18 V
BNE018-1
GEA006-2
3