Battery Disposal and
EN
Removal
The built-in lithium-ion battery contains substances
that are hazardous to the environment. Before
disposing of the battery, make sure the battery is
removed by qualified technicians and discarded at
an appropriate recycling facility.
– the battery must be removed from the appliance
before it is scrapped;
– the appliance must be disconnected from the
supply mains when removing the battery;
– the battery is to be disposed of safely.
CAUTION:
Before removing the battery, disconnect the power
and run out the battery as much as possible.
Unneeded batteries should be discarded at an
appropriate recycling facility.
Do not expose to high temperature environment to
avoid risks of explosion.
Under abusive conditions, liquid may be ejected
from the battery. If contact occurs, flush with water
and seek medical help.
16
Removal Guide:
1. Turn over the robot, use a proper tool to remove
the screws on the back of the robot, and then
remove the cover.
2. Unplug the terminals between the battery and
PCB board to remove the battery.
WEEE Information
All products bearing this symbol are waste
electrical and electronic equipment (WEEE
as in directive 2012/19/EU) which should
not be mixed with unsorted household
waste. Instead, you should protect human
health and the environment by handing
over your waste equipment to a designated
collection point for the recycling of waste
electrical and electronic equipment,
appointed by the government or local
authorities. Correct disposal and recycling
will help prevent potential negative
consequences to the environment and
human health. Please contact the installer
or local authorities for more information
about the location as well as terms and
conditions of such collection points.