Before Use - Hilti UW 10 Bedienungsanleitung

8. Before use

Hold the tool at right angles to the work surface and pull
the trigger.
Basically, the tool should be transported with the two
white marks away from each other i.e. in the safety posi-
tion.
Printed: 08.07.2013 | Doc-Nr: PUB / 5071291 / 000 / 01
Unlocking the tool:
The tool can be fired only when the white marks are posi-
tioned next to each other.
Cycling the tool:
To cycle the tool, first turn the cycling knob to the left and
then to the right, as far as possible each time.
en
21