16 -Replacing The Batteries - Bpt TH 125 Gebrauchsanweisung

18
24
15
22
6
18
18
24
15
22
6
18
conclusion THERMOPROGRAM will go back
to the status it was in prior to activation.
To delete remote control of the fixed-time
manual program, press the button
The default setting for the fixed-time manual
programme is 1 hour at 20 °C.
Note. When the program is activated remo-
tely, the remaining time in the hour or day is
counted as a full hour or day.
20
26
22
28
24
Fig. 48
20
26
22
28
24
Fig. 49
Fixed-time manual programming by remo-
te control
15.1 - Ensure you are in MANUAL operating
. mode.
15.2 - Set the desired temperature using
knob (fig. 47).
15.3 - Press button
hours (fig. 48), twice to set the days (fig.
49).
20
26
18
24
22
15
22 28
6 24
18
Fig. 50
On the display, instead of the current time,
the message h01 will appear if you are set-
ting the hours, or d01 if you are setting the
20
26
18
days.
24
15.4 - Press button
22
15
22 28
reach the desired hours (fig. 50) or days (fig.
6 24
51) from 1 to 99.
18
15.5 - To save the set programme as a pro-
Fig. 51
gramme which can be remotely activated,
press the button
16 - REPLACING THE BATTERIES
When the
display, it means you have about 1 month to
replace the batteries (fig. 52).
When the
once to set the symbol appear on the display, the unit is no
longer operative and has set the heating and
air-conditioning system to OFF (fig. 53).
20
26
18
24
22
15
22 28
6 24
18
Fig. 52
or until you
.
indicator flashes on the
indication plus the
17