10 -Stand-By Mode In Heating Program - Bpt TH 125 Gebrauchsanweisung

15
22
Fig. 30
18
24
15
22
6
18
the setting is made counts as a whole hour).
Note. To return to AUTOMATIC mode before
the programmed time is up, press the
button (fig. 29).
Programming in days
9.4 - Select MANUAL operating mode and
set the desired temperature with knob (fig.
30).
20
26
18
24
22
28
6 24
18
9.5 - Press the button
The message d01 comes up on the display
in place of the current time.
20
26
9.6 - Press the button
until you reach the desired number of days,
22
28
which can range from 1 to 99. The count-
24
down of the days also includes the day on
which programming is carried out (hence,
Fig. 31
the remainder of the day in which the setting
is made counts as a whole day).
Note. To return to AUTOMATIC mode before
the programmed time is up, press the
button (fig. 33).
10 - STAND-BY MODE IN HEATING
PROGRAM
System bypass can be set either with or
without antifreeze protection.
This setting is useful during winter cleaning,
20
26
18
24
15 22
28
22
6 24
18
Fig. 32
twice (fig. 31).
OFF
OFF
or (fig. 32)
maintenance work, or when you are away in
summer, etc. The unit works simply as a
clock and room thermometer. With anti-free-
ze protection.
With anti-freeze protection
10.1 - Press the button
The message OFF confirms your choice.
The display will show the previously set anti-
20
26
18
24
22
15
22 28
6 24
18
Fig. 33
20
26
18
24
15 22
28
22
6 24
18
Fig. 34
once (fig. 34).
13