Control Panel Functions - Lionelo Ralf Bedienungsanleitung

Control panel functions

To use the infant swing feature, turn the product on (1, fig. D).
A. Rocking
Set the rocking speed through key 2, 3 (fig. D).
When rocking is active, you can:
- activate the automatic motion detection mode: press the key 4 once (fig. D).
- deactivate rocking: press the key 4 twice (fig. D) (when you want to keep the music on,
not turning the entire product off)
The automatic motion detection mode: the infant swing can detect the child's movements
and activate rocking on its own.
B. Melodies
To play the melody, press the play melody key (6, fig. D)
When the melody is playing, you can:
- press the key 6 (fig. D) to stop it,
- press the key 6 (fig. D) twice to play the next track,
- hold the key and release to change the volume.
C. Time setting
Press the key 5 (fig. D) and select the time. When the time is up, the infant swing's functions
will be deactivated.
Troubleshooting
Problem
Music stops playing, and rocking is
suspended
Keys do not work
The infant swing shakes rapidly while in
use
Poor light of the control lamp
How to clean and maintain
Before cleaning, unplug the device.
The seat covering can be washed manually or in the washing machine at the temperature
of up to 30°C.
The frame and base of the infant swing must be cleaned with a wet cloth and soft cleaning
agents.
Solution
Batteries are worn-out or incorrectly
inserted. Exchange the batteries for new
or check if the position of terminals is
correct (+ -).
Check if batteries have been inserted in
accordance with terminal marking (+-).
Check if the batteries are in the holder.
Make sure all parts have been properly
installed and firmly secured.
The battery is low
‑ 9 ‑ EN