EN
Note: The serving dishes can keep food hot for long periods. It is not recommended to
exceed six hours.
Do not leave food in the serving dishes. Remove for easy cleaning and preparation for
•
the next usage.
Do not place the lids directly onto the hot surface of the warming tray.
•
Only use cooked food in the buffet warmer. Never put cold or raw food into the
•
warmers.
Do not use the warmer to reheat food.
•
To use the warming tray without the serving dishes, remove the serving dishes and
•
frame from the warming tray.
Place the warming tray onto a flat surface, table or work surface.
•
Ensure the buffet warmer is the correct way up.
•
Plug the appliance into the mains power supply at the wall socket.
•
The indicator light will illuminate to show the appliance is working.
•
Adjust the temperature control knob to the desired temperature, so you can keep your
•
food hot.
Preheat the appliance for ten minutes; the indicator light will turn off once the desired
•
temperature is reached.
You may place heat-resistant casserole dishes or plates/dishes of food directly onto the
•
warming plate.
Unplug the appliance when not in use.
•
NOTE: Always allow the appliance to cool fully before cleaning.
After use and before cleaning, allow the appliance to cool down completely.
•
Once cool, remove all food and liquid from the serving dishes.
•
Remove each lid and dish from the frame.
•
Clean the frame, serving dishes and lids in warm, soapy water.
•
Rinse well in clear water and dry thoroughly with a soft dry cloth.
•
When cleaning the appliance, DO NOT use abrasive cleaning detergents, cloths or
•
sponges as they could damage the Stainless steel.
To remove food and liquid, clean the warming tray with a non-abrasive cloth or sponge.
•
How to use the warming tray
Cleaning your appliance
4