Philips RC369 Bedienungsanleitung Seite 10

CASSETTE PLAYER
PLAYBACK
• Slide the cassette, with the open side to the
right into the cassette opening.
mutes and cassette
direction of playback
< or > .
STOPPING PLAYBACK
To stop playback, press the
home.
— The unit will switch over to radio reception.
— The cassette is partially ejected.
REVERSE ( < )
• Press both < and
halfway in.
At the end of the tape, playback automatically
continues in the reverse
FAST WINDING and h)
The direction of fast winding
direction of play indicated on the display.
Display during Action
playback
Fast forward
Fast
Fast forward
Fast
During fast forward
radio. If you continue fast winding
of the tape, playback restarts automatically.
TO STOP FAST WINDING
• To stop fast winding
tape, briefly press the key which
pressed or»
• Playback is then resumed.
* only for certain versions
10
The radio
playback starts. The
is shown by indicator
( )
button fully
buttons at the same time
direction.
depends on the
Key to press
rewind
rewind
or rewind, you hear the
until the end
before the end of the
is not
MAINTENANCE
After extended use of the cassette player, dust,
contamination or grime can accumulate
playback head.
This results in
reproduction. This can be remedied
cleaning cassette (once or twice a month) and
playing it through like an ordinary
CARE OF CASSETTES
— Only use good quality
than C-90).
— To avoid possible
out the cassette after
their boxes immediately
Never expose cassettes
sunlight.
CD CHANGER*
A Philips CD changer (D2Btype) with 6 or 10 discs
can be connected to this
3
2
CD PLAYBACK
• Briefly press the
CHANGER as the source.
• Select the desired
The display shows the track number, elapsed
playing time and current disc number during
playback.
At the end of the disc, playback
continues with the next disc. Any missing disc
is automatically skip.
PREVIOUS/NEXT TRACK
• Briefly press the < or
the desired track.
Playback resumes
track. The display
number and elapsed
FAST BACKWARD/FORWARD
• Press and hold
quickly to another
playback. Playback resumes when
released.
TRACK SCAN
• Press SCAN key during
the first 10 seconds
• Press the SCAN key again to resume normal
playback.
on the
diminishing high-note
using a
cassette.
cassettes (not longer
tape damage always take
use. Put them back
after use.
to heat or direct
car radio.
REPEAT
4 5
MANUAL
SOURCE key to select
disc with DISCA or DISCV.
automatically
buttons to select
starting from the chosen
shows the selected track
playing time.
or buttons to
part of the disc during
or
playback to hear
of each track.
in
6
move
is