VEVOR TC-20 Bedienungsanleitung Seite 10

Step 3. Pour the needed amount of paint into a mixing cup.
Step 4. Determine the mixing ratio. The ratio of thinner to paint depends on
the brand of paint and the surface you're painting. Most paints will have
thinning instructions on the can that include the recommended thinner and
thinning ratio.
Step 5. Add the proper ratio of thinner to the amount of paint in the mixing
cup. If the paint you are using does not have any instructions, generally,
you need to start with a ratio of two parts of paint to one thinner part. If the
paint is still too thick, add more thinner until you achieve the desired
consistency. Conversely, if the paint is too thin, add more paint to thicken it
up. Then thin the paint to a watery consistency, until it flows like milk.
Step 6. Slowly stir the mixture with a mixing stick until the paint is
thoroughly mixed.
Step 7. Pour the thinned paint through a paint strainer into a second mixing
cup. This step is optional, but ensures that there is no dirt or debris in the
paint.
Tip: Test the mixture on a scrap piece of material before beginning your
project
Warning: Follow any manufacturer's safety instructions that maybe
included with the paint, and use a little common sense. Solvent based
paints and thinners/reducers are flammable, so keep them away from open
flames. Use solvent based paints in a well ventilated area, and wear a
respirator if needed.
Step 5.Add the proper ratio of thinner to the amount of paint in the mixing
cup. If the paint you are using does not have any instructions, generally,
you need to start with a ratio of two parts of paint to one thinner part. If the
paint is still too thick, add more thinner until you achieve the
desired consistency. Conversely, if the paint is too thin, add more paint to
thicken it up. then thin the paint to a watery consistency ，until it flows like
milk.
Step 6.Slowly stir the mixture with a mixing stick until the paint is
thoroughly mixed.
Step 7.Pour the thinned paint through a paint strainer into a second mixing
- 8 -