Warning Signs - Vevor Rbc-25 Bedienungsanleitung

line according to distance.
(wire) max.longth
15m
25m
40m
1.1.2 Additional safety rules
①.When the machine is running, don't clean or remove scraps
②.Do not remove or modify the warning signs even not replace or any may
cause confusion of marks.
③.Carefully reading the manual before operating the machine.
④.The machine on ground correctly, to avoid hazard shock.
⑤.Not away till the machine is off.
⑥.Before replace the module the machine should stop completely .
⑦.before starting, confirm. determine the correct, bending Angle.
⑧.Do not to put any tools on platform before starting work, to avoid
accidents .
⑨.Use appropriate tools to adjust machine.

1.2. Warning signs:

This machine has warning symbols attached on it as shown below to
ensure proper and safe operation.
These symbols are used on the machine to indicate points or instance of
specific danger to operating personnel.
Do not remove safety symbols from the machine.
The safety have two grade that are
this manual:
Dangerous—Means the dangerous by the wrong operating and lead
death and GBH.
Attention—Means the dangerous by the wrong operating and lead the hard
RB-25 / RBC-25
Diameter of wire / wire size
2.0sq X 3C
3.5sq X 3C
5.5sq X 3C
Danger and
- 4 -
Attention in