VEVOR RBC-25 Bedienungsanleitung Seite 14

Ø16- Ø20
Ø10- Ø13
Ø6- Ø13
Special situation
2.2.Attention items
① Must according to Contemporary bending capacity to use this products,
surpasses easily to cause this product breakdown.
② when go on steel bar bending work, special attention to avoid injure the
finger and so on safety incident.
③ according to the different hardness of reinforced material ,special
attention should be paid to avoid the fragcture which may lead to safety
incidents such as wounding.
④.please do not operate untill you confirm no person and object in the
reinforced bending radius.
⑤.the product is electric functional machinery.as encountered by rain or
watter lead to leakage,it must be coverd with waterproof membrane after
use.
⑥ assure the stationary ring bolt is fixed when transit or move the
machine.
⑦,when operating under point 2,fix angle of point 2 same as or no larger
than point 1 of 5 degree,to ensure that under the condition when exterior
shock attacks the machine itself will not move to left and right to operate
the machine.
⑧.make sure the stationary ring bolt is fixed when transit or move the
bender.chains must be inserted into the safety pin to pretend the bender
from shaking or waving in transit.when move the bender by fixing
handle ,4bolts can not loose ,then move the bender together by 4 handles.
⑨ prohibit to use idler wheel items
If marks according to below (X) the method operation troughing of belt
hoop will burst easily. Records the proper operation sincerely!
Ø78
Ø78
module
Possible
customize
- 13 -
Ø94
Ø94
Ø94
Possible
customize
1-2 pcs
4-5 pcs
3-6 pcs