In particular, clean the air vents after
o
every use with a cloth and soft brush.
The vents must always be clear.
Before and after each use: Check
o
the product and accessories (e.g.
saw blades) for wear and damage. If
required, replace worn or damaged
accessories. Observe the technical
requirements (see "Technical data").
Check covers and safety devices
o
for sound condition and correct
installation. If that is not the case,
have them replaced by an expert.
Replace the sa blade
o
becomes blunt, bent or damaged in
any other way.
Repair
This product does not contain any
o
parts that can be repaired by the
user.
Contact an authorised service centre
o
or a similarly uali ed person to have
the product checked and repaired.
Storage
Clean the product as described
o
above.
Store the product and its accessories
o
in a dark, dry, frost-free, well-
ventilated place.
Always store the product in a place
o
that is inaccessible to children.
The ideal temperature for a long term
o
storage longer than months is
bet een 20
Store the product in its carrying
o
case.
38 GB/IE
if it
[
6 ]
and 2
Battery pack
Before storing for extended periods:
o
Only store the battery pack
partially charged. The battery pack
should be charged at 0 to 0
and orange charging level LEDs
light up).
When storing for extended periods:
o
Check the charging level of the
battery pack
[
3 ]
months Recharge the battery
pack, if necessary.
Transportation
Transport the product in its carrying
o
case.
Protect the product from any heavy
o
impact or strong vibrations which
may occur during transportation in
vehicles.
Secure the product to prevent it from
o
slipping or falling over.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and
numbers (b) with following
meaning: 1–7: plastics/20–22:
paper and breboard 80
composite materials.
Product:
3 ]
[
red
[
]
about every
8