Cdchanger - Philips Rc328 Bedienungsanleitung

MOUNTINGINSTRUCTIONS ( continued)
Connectin g 4 loudspeakers ( seeillustration) 4 x
1 = RearRightphase(RR +)
3 = FrontRightphase(FR+)
5 = FrontLeftphase(FL +)
7 = RearLeftphase(RL +)
PREPARING CONNECTOR C
CDCHANGER:Youcanconnect a CD*changer ( D2Btype) tothisset(see themounting
instructions f or the CD*changer).
PORTABL E PLAYER: Toincrease your l istening possibilities
CDorcassett e player t othis set ( inplace ofaCD* changer). Use the cable mentioned inthe
illustration . The cable must b econnected toanoutput o f750mV(inmost c ases t heheadphone
t outpu oftheportable p layer i ssuitable).
ct Sele optio n 'SRC andset t hechoice t o 'AUX' asdescribed under ' INITIALISATION'.
s indicate totheset t hata portable p layer i sconnected instead o fa CD*changer.
[Ä Increas e thevolume of theportable playertodesired level.
INSTALLING METAL SLEEVE
t Inser metal sleeve i ntotheopening ofthecardashboard o r console.
[Ä Fixmeta l sleeve i ntoplace bypressing themetal tags outwards using a screwdriver.
CONNECTING RADIO
4.1 Fitantenna adaptorif needed.
4.2 Inser t aerialplugintoaerial a daptor/ s ocket.
4.3 Screw rubberbufferontofixingstudat rearof set.
4.4 Inser t power s upply plugA intosocket A'
4.5 Insert l oudspeaker plugBintosocket B l
4.6(wher e ) applicable
theCD*changer o r Portable player.
4.7 (wher e applicable )
additional loudspeakers )
Note: Remot e ON/OFF wirefromthepower a mplifier s hould beconnected to [A5]of connector A
MOUNTING RADIO
• Slidetheradiointothemetal s leeve u ntilthesprings at either sideof theradiosnapinb the
openings of thesleeve.
• Reconnectthenegative carbatteryterminal.
— Installation is now complete.
G REMOVIN RADIO (using thetwoU-brackets s upplied).
Inser t bothU- brackets [x] intotheholes [y] untiltheylock.Pull o uttheradio.
G REPLACIN FUSE (seeillustration 4)
e Replac witha blade-type fuseof thecorrect r ating.
INTERFERENCE SUPPRESSION
Mostmodern carshave sufficient interference suppression. Ifyouexperience i nterference generated b ytte car,
consult y ourgarage.
*only for certainversions.
2 = RearRightreturn(RR —)
= FrontRightreturn(FR —)
6 = Front Lefrreturn (FL—)
8 = Rear Left return (RL—)
* Remove the plastic cover from socket C'and insert the rectangular
* Line output ( 2or4-channel): You canconnect a power amplifier (with
tothissetusing theRCA cableD.(see illustration 4)
you can connect aportable D CC,
This
plug from