Parts List; Installation Guide - Create Microwave Retro Bedienungsanleitung

1
2
3
4
5
1. Waveguide
(do not remove the
mica plate covering the
waveguide)
2. Glass tray
• Be sure to remove all packing materials from inside the door.
Warning: Check the microwave for damage, such as a misaligned or bent door, damaged
door seals and sealing surface, broken or loose door hinges and latches, and dents inside the
cavity or on the door. If there is any damage, do not use the microwave and contact qualified
service personnel.
• This microwave should be placed on a flat, stable surface to support its weight and the
heavier foods that may be cooked in the oven.
• Do not place the microwave where heat or moisture is generated, or near combustible
materials.
• For proper operation, the microwave must have sufficient airflow. Leave a minimum of 20
cm of free space required above the top surface of the microwave and 5 cm on both sides.
The back plate of the microwave should be placed close to the wall. Do not cover or block
any openings on the appliance. Do not remove the legs.
• Do not use the microwave without the glass plate, support and shaft in their correct
positions.
• Make sure the power cord is not damaged and does not pass under the microwave or over
any hot or sharp surfaces.
• The plug should be easily accessible so that it can be easily unplugged in an emergency.
• Do not use the microwave outdoors.

PARTS LIST

3. Grill
4. Door
5. Door security locking
system

INSTALLATION GUIDE

6
7
8
9
6. Control Panel
7. Metal grill for cooking
8. Rotating ring
9. Axis
E NGLI SH
9