Note
• Ensure that the mounting surface is
clean.
• Do not install the connection box
- in locations subject to high
temperatures
- in locations subject to direct sunlight,
warm air from heater outlets, or
other locations that can get hot.
• When attaching the hook-and-loop
fastener to the bottom of the connection
box, do not cover the model name plate
in the center.
Use of connectors
Insert until the connector clicks into
place. To remove, press here and pull out.
8
Installing the connection box XA-114
Cut off the required length of hook-and-loop fastener 8 and fix
the connection box 1 on the carpet or similar.
Hook-and-loop
fastener 8
On installation surface
Hooking up the connection box
Refer also to the section "3 Car Systems Connections" (page 13 -
15).
Main unit/connection
box interconnect 3
To Media Center main unit
Insert 3 until a click is heard.
Hook-and-loop
fastener 8