Mounting Of Handle; Start And Stop Of Engine - Texas A/S MT 510 Bedienungsanleitung

Mounting of handle

Mount the lower handle with the bolts
supplied. Lift the upper handle to vertical
position. Tighten the two wingnuts that hold
the upper and lower handle together

Start and stop of engine

REMEMBER: Always check engine oil before start!
Oil level must be between min. and. max on the oil stick.
Fill with SAE-30 oil.
Handle
The petrol cock must be pushed all the way
to the left when using the machine (further
than shown in the picture).
Fuel valve.
The petrol cock is placed behind the air filter
on the left side of the engine.
Only use unleaded petrol octane 95 for the
engine. Never overfill the tank.
19