Azdome PG17 Max Bedienungsanleitung Seite 30

Loop Recording - 1 Min (Default)/ 2 Mins/ 3 Mins
Activate loop recording to ensure continuous video capture on
your dash cam. When the memory card reaches capacity, the dash
cam will automatically overwrite the oldest files, making room for
new recordings. You can choose the length of each video file for
loop recording.
Time-Lapse Recording - OFF (Default)/ 1 FPS/ 2 FPS/ 5 FPS
Enable time-lapse recording to capture video at a reduced frame
rate, allowing for faster playback. This feature is ideal for
condensing long drives into shorter videos.
Light Source Frequency - 50Hz (Default)/ 60Hz
50Hz and 60Hz power frequencies are suitable for different
regions: 50Hz is suitable for Europe, Asia, Africa; 60Hz is suitable for
North America, South America and some Asian countries.
Choosing the appropriate frequency ensures the stability and
effectiveness of your device when recording video.
G-Sensor - OFF/ Low/ Medium (Default)/ High
The G-Sensor detects accelerations and impacts. Higher sensitivity
means less force is needed to trigger file protection. You can
customize the dash cam's response to different driving situations.
Parking Mode G-Sensor - OFF/ Low/ Medium (Default)/ High
You can adjust the sensitivity to customize how the dash cam
responds to disturbances while parked. If your vehicle is impacted,
the parking mode G-Sensor will activate the dash cam, starting a
1-minute recording that will be saved in the "Video-Lock" folder.
Time-Lapse Parking Mode - OFF (Default)/ 1 FPS/ 2 FPS/ 5 FPS
1. When you turn off the car's engine, the camera will stop the
normal video recording and switch to time-lapse mode
EN-30