Azdome PG17 Max Bedienungsanleitung Seite 8

Apply the Anti-glare Film
1. Peel the protective paper cover off the film and apply it to the
monitor.
2. Start in the top left corner and smooth the plastic against the
monitor carefully to avoid trapping air between the monitor and
the film.
PLEASE NOTE: Anti-glare film only reduce the glare but not
eliminate the glare.
Rear Camera Installation
The rear camera equipped with a 6-meter cable is to connect to
the dash-cam via AV port. Before installation, please check if the
provided cable is long enough to reach the rear cam in your car.
Position A: Install the rear camera on the rear windshield.
Position A is designed for live stream rear review only, not for
reversing guide. The installation is easier.
Position B: Install the rear camera near the license plate.
The back image is crisp and clear for both rear viewing and
reversing guide.
Connected to rear camera
Connected to reversing light
EN-08