Service Data; Installation - ZANKER KOB57602 Benutzerinformation

Problem
The appliance is activated and does
not heat up. The fan does not oper-
ate. The display shows "Demo".

Service data

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to Safety chapters.
22
Possible cause
The demo mode is activated.
We recommend that you write the data here:
1.
2.
3.
4.
5.
6.
appliance cavity. Do not remove the rating plate from
the appliance cavity.
.........................................
.........................................
.........................................
Remedy
Deactivate the oven.
Press and hold the button
When an acoustic signal
sounds, turn the knob for the
oven functions clockwise to the
first function. "Demo" flashes
in the display.
Turn the knob for the oven
functions to the off position.
Release the button .
Turn the knob for the tempera-
ture clockwise and hold it for
three seconds. The acoustic
signal sounds three times. The
demo mode is deactivated.
.