Service Data; Installation - ZANKER KOB20722XK Benutzerinformation

What to do if...
Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle on
the food and in the cavity of the
oven.

Service data

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of the
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to Safety chapters.
Possible cause
The oven is deactivated.
The fuse is blown.
The lamp is defective.
You left the dish in the oven for too
long.
We recommend that you write the data here:
Activate the oven.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Replace the lamp.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
oven cavity. Do not remove the rating plate from the
oven cavity.
.........................................
.........................................
.........................................
Building In
min. 550
20
600
min. 560
9
3
Remedy
540 21
558
114
19
589
570
598
594
17