Zehnder ComfoControl CC Luxe Installationsanleitung Seite 46

Multiple malfunctions will be
displayed in the "SYSTEM
STATUS" screen. Only "ERROR
E2" is currently displayed.
Filter warning on the CC Luxe
If the ventilation unit's filters require
replacement, then the "FILTERS –
REPLACE FILTERS" warning appears on
the CC Luxe display.
To replace (or clean) any filters,
please refer to the ventilation
unit's manual.
The filter warning can be reset as follows:
1. Press " " to go to "system status".
Check: Filter
2. Press " " to delete the "Filters -
Replace filters" warning.
System status
System status
2
Filter E2
Reset
Status information on the CC Luxe
In the absence of error message, you will
see:
� "CHECK: OK" on the screen of the CC
Luxe.
Information on the status of your
ventilation and/or cooling system can
then be accessed. This goes as follows:
1. Press " " to go to "system status".
EN 46
Wednesday
Cooker hood
Settings
1
GHE
Check: OK
The "system status" screen displays all
the system data on the CC Luxe.
System status
Inside temperature
Outside temperature
Bypass
GHE
Heater
ComfoCool
Filter remain
Comfo Control
Controller HR
2. Press " " to return to the main
screen.
Malfunction alerts
Alerts of possible malfunctions can be
found in the ventilation unit's manual. A
copy of this manual is available from the
supplier of your ventilation unit.
The system should remain connected to
its power supply unless the ventilation
unit requires taking out of service due
to a serious malfunction or for filter
cleaning/replacement or any other
compelling reasons. When the unit is
unplugged, the dwelling will no longer
benefit from mechanical ventilation, and
this can lead to problems with damp
and mould. Long-term deactivation of
the ventilation unit must therefore be
prevented.
Wednesday
Cooker hood
Settings
1
GHE
2
21ºc
15ºc
Closed
Open
Not installed
Not installed
3 wks
Rev. 3.007B1.007
Rev. 0.000