Zehnder ComfoControl CC Luxe Installationsanleitung Seite 33

Advanced settings
Screen
Timers
Set time
Check:
The following settings can be made in
the second screen of the system settings
menu:
- Language settings of the CC Luxe;
- Temperature corrections;
- P menus (only accessible by the fitter
via the Service Login).
Advanced settings
Language
T Correction
Service Login
3
Check:
The system settings menu can be
accessed as follows:
1. Press Settings.
2. Press System.
3. Press ' ' to switch between the two
screens.
By pressing on «DATE and TIME»
in the top right-hand corner
of the screen, you are taken
straight to the Time Settings
menu, and as such the first
screen of the system settings
menu.
Use the arrows in the right section of the
menu screen to change the settings. Your
settings will always be saved immediately.
You can leave the menu by pressing '
in the top right-hand corner of the screen.
Temperature correction settings
It is possible to let the displayed room
temperature on the main screen of the
Wednesday
GHE
Francois
Polski
Nederlands
Italiano
GHE
CC Luxe differ (slightly) from the actual
temperature measured. This makes it
possible to set the CC Luxe in such a way
that it displays the same temperature as
the room thermostat. To that end, the
preferred deviation in ºC must be set
in the Settings > System > T correction
menu. The temperature to be displayed in
the main screen is shown in a rectangle
underneath the selected deviation.
Advanced settings
Language
T Correction
Service Login
Check:
Displaying temperatures
The Touch screen displays two
temperatures:
� The outside temperature or EWT
temperature;
� The room temperature.
You can also opt not to display
temperatures or to have only the room
temperature displayed. The relevant
button can be found in the bottom of the
T correction menu screen (Settings >
System > T correction menu). This button
can be set as follows:
� Show all: Both temperatures are visible.
� Indoor only: Only the room temperature
is visible.
� Hide all: No temperatures are visible.
Ventilation programme settings
The selected ventilation
programme only works if the
'
CC Luxe has been set to AUTO
modes.
Ex-factory the ventilation unit has a
factory set ventilation level (setting 2) in
its ventilation programme.
Temperature
Show All
GHE
33 EN