Zehnder ComfoControl CC Luxe Installationsanleitung Seite 37

Submenu
P23
(Optional)
Note:
Only applies to
systems fitted with
an hardwired
3-position switch.
P24
P25
Note:
Only applies to
systems fitted with
an RF switch.
P26
Note:
Only applies to
systems fitted with
an RF switch.
Description
Deactivation delay for ventilation setting
3.
• I f you BRIEFLY engage ventilation
setting 3 (<3sec.), the ventilation unit
switches to the HIGH SETTING for
"x" minutes and then switches back
automatically to the normal ventilation
setting.
If a 3-position switch is operated during
the time delay mode, then the ventilation
unit switches immediately to the selected
ventilation setting.
Filter warning
• Here the user can indicate when the
" " alert must appear.
filter dirty
Deactivation delay for ventilation setting 3
(using " ").
• After pressing "
sec.), the ventilation unit switches to the
HIGH SETTING for 'x' minutes and then
switches back automatically to the normal
ventilation setting.
If a 3-position switch is operated during
the time delay mode, then the ventilation
unit switches immediately to the selected
ventilation setting.
Deactivation delay for ventilation setting 3
(using " ").
• After pressing AND HOLDING "
(< 2 sec.), the ventilation unit will switch
to the HIGH SETTING and automatically
switch back to the set level after 'x'
minutes.
If a 3-position switch is operated during
the time delay mode, then the ventilation
unit switches immediately to the selected
ventilation setting.
Minimum
0 Min.
10 weeks
1 Min.
" BRIEFLY (<2
1 Min.
"
Time delay values
Maximum Factory
reset
120 Min. 0 Min.
26 weeks 16 weeks
20 Min. 10 Min.
120 Min. 30 Min.
37 EN