Read File From Mds (Read File From Tag); Read File From Stg Ram - Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung

The "FILEHANDLER" Program
5.4.1

Read File from MDS (Read File from Tag)

After this function has been called, a menu appears in which you can select a
file with the cursor keys. All file names can be scrolled through, including the
ones in the directory view (see chap. 5.3.2).
5.4.2

Read File from STG RAM

After this function is called, a menu appears in which you can select a file with
the cursor keys. All file names in the RAM of the hand-held terminal with the
file extension .HEX are displayed. If the STG RAM does not contain any files
with the extension .HEX, the message "No file available" appears.
E-36
After you have scrolled through all the files,
the file name "New Tag DIR" appears. If you
press the Enter key, the filehandler reads a
directory from an MDS.
You can then select one of the new files
If you continue paging through the file selec-
tion menu until the file name "Other File" ap-
pears, you can enter a file name (with the
ASCII keyboard of the hand-held terminal) in
the menu which appears.
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
R 05/07