The Extras Menu; Parameter - Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung

The "FILEHANDLER" Program
5.7

The Extras Menu

5.7.1

Parameter

The "parameter" function is used to make the basic settings for the filehandler.
Parameter Description
MDS size The gross memory size of the MDS is set here.
This memory size is shown in the first line of the display. The Format
command uses the memory size to specify the file system. If the
"MDS size" parameter does not correspond to the MDS being used,
the MDS can still be used. Only the Format command would produce
the wrong result.
MDS type Here you can switch between RAM, EEPROM and MDS 507. FRAM
memory is treated as RAM memory. If EEPROM is selected, the bat-
tery error message is suppressed on the display since these MDSs do
not have batteries. If MDS 507 is selected, the dialog battery is also
evaluated. When empty, this is shown on the display.
ECC Activate/deactivate ECC driver
SLG no. When an MDS is processed, the SLG no. selected here is written to
(hex) the system area of the MDS. It has no effect on the function of the Fi-
lehandler program on the STG hand-held terminal PRO.
EAKO The entry/exit check cannot be set on the STG hand-held terminal
PRO with the filehandler. The STG hand-held terminal PRO does not
use entry/exit control (AEKO = 4).
E-46
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
R 05/07