Password; Antenna - Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung

The "MOBY D/E/I" Programs
4.5.2

Password

A password can be programmed as an option. The password must be entered
prior to a write-access function. Once entered, a password remains valid until
the STG is turned off (i.e., the password only has to be entered once during
several consecutive write commands). The "MOBY" program can also only be
exited with the password.
Forgot the password?
If a password is forgotten, there is no way to obtain it again. The only solution
is to reset the Software to delivery version. Activate in start menu supervisor
state (see chapter 6.5.1). Than do a shutdown/coldreset.
Password 99999999
Changing the password to 99999999 (i.e., eight 9s) has a special purpose.
The write-access function to the MDS and the "file/exit" function can no longer
be executed. The password can also no longer be changed. The only way to
access the write-access function again is to do a system reset (see
chapter 6.5.1).
4.5.3

Antenna

Only for MOBY E: The antenna field on the read head is switched between
"card" (large antenna) and "button" (small antenna). See also chapter 3.2.
The antenna must be set once when the read head is commissioned. The
set antenna is retained on the read head when the hand-held terminal is
turned off.
E-26
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
R 05/07