Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung Seite 71

R 05/07
Filehandler Description of Error, Its Cause and Correction
Error
D001 Only RESET command permitted
D005 Illegal parameters for FORMAT, CREATE, WRITE,
UPDATE or ATTRIB
D009 RESET command parameter wrong
D014 CREATE and WRITE: The user data area of the MDS
is completely full.
D015 Only FORMAT command possible. MDS not identified.
D018 Start address in the command is outside the data area
(i.e., start address > file length).
D022 Directory and/or FAT. Modifying an MDS protected with
COVER is illegal.
D023 COVER: MDS name wrong
E001 MDS type is wrong or doesn't match the set mode
(ECC).
E002 CREATE command: No more directory entries free
E003 CREATE command: File already exists in the directory.
E005 READ or WRITE: A FAT block sequence error was de-
termined. The FAT is defective.
F001 The addressed file does not exist.
F005 WRITE/UPDATE/DELETE command for a file which is
protected with the appropriate attribute
H140 Serial interface error
H141 Wrong interface
H142 Faulty timer
H143 Interface error
H144 Start-protocol error
H145 Reset error, WRITE
H146 Reset error, READ, no STX
H147 Reset error, READ, timeout
H148 Reset error, READ, wrong response
H149 Start error, WRITE
H150 Start error, READ, no STX
H151 Start error, READ, timeout
H152 Start error, READ, wrong response
H153 Start error, WRITE, length too long
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
Error Messages
Type of
Error
Job-related Job related
errors
Directory-
related related
errors errors
File-related File related
errors
Error Error
messages
of the of the
filehandler filehandler
application pp
E-65