System Reset - Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung

R 05/07
6.6

System RESET

The hand-held terminal executes a system RESET when the device is turned
on for the first time after the batteries have been installed. This RESET is the
same as a hardware RESET.
A system RESET can also be triggered by hand. To do this, change STG
Hand-Held Terminal PRO in supervisor mode. See chapter 6.5.1. Than acti-
vate the function "Cold Reset" via start menu/Shutdown.
During the system RESET:
S Data stored in flash memory are always retained ("Flash Disk").
S The data in RAM memory are lost.
Be aware that your password for supervisor mode is also reseted and has to be
initialized again.
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
Expanded Functions
E-59