DUROFIX RJ1217 Produktinformationen Seite 5

WARNING
Do not force the power tool. Use the correct tool for your application. The correct tool will do
a.
the job better and safer at the rate for which it is designed.
b. Do not use the power tool if switch does not turn it on or off. A tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable,
c.
from the power tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the tool accidentally.
d. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in
the hands of untrained users.
e. Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
f.
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
g.
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in a
hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations. Use clamps or other practical way to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body is unstable and may lead to
loss of control.
When battery pack is not in use, keep it away from other metal objects like: paper clips,
i.
coins, keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
j. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with
sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any other
k.
condition that may affect the tool's operation. If damaged, have the tool serviced before
using. Many accidents are caused by poorly maintained tools.
l. Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one tool may create a risk of injury when used on another tool.
WARNING
a. Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
c. Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
d. When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a fire.
e. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
1English1
BATTERY TOOL USE AND CARE
English
-4