DUROFIX RJ1217 Produktinformationen Seite 11

eyes. When cutting metal, always use cutting oil to maintain the life of blade.
WARNING
Remove the battery pack from this tool before cleaning solutions.
NOTE
This tool is lubricated before it leaves the factory. This lubrication should last for the life of the tool.
Further lubrication is required.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least
once a week. Wear safety glasses when performing this. Exterior plastic parts may
be cleaned a damp cloth and mild detergent. Although these parts are highly are
solvent resistant, NEVER use solvent.
CHARGER CLEANING INSTRUCTIONS
Dirt and grease may be removed from the exterior of the charger using a cloth or soft
non-metallic brush. Do not use water or any cleaning solutions.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous when
used on another tool.
Recommended accessories for use with your tool are available at extra cost from
your local service center.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustments should be performed by certified service centers or other qualified service organizations,
always using identical replacement parts.
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool, charger and battery or return them to a certified service center for
recycling .
1English1
MAINTENANCE
ACCESSORIES
PROTECTING THE ENVIRONMENT
English
-10