Adjusting The Projector; Turning Off The Power - Sony VPL-ES2 Kurzreferenz

Adjusting the Projector

1 Adjust the position of the picture.
2 Adjust the size of the picture.
3 Adjust the focus.
The projector is equipped with the PICTURE SETTING menu to select the picture mode,
and the INPUT SETTING menu to select the appropriate aspect ratio of the picture. For
details, see the Operating Instructions contained in the CD-ROM.
1
1

Turning off the Power

1 Press the I/1 (on/standby) key.
2 When a message appears, press the I/1 (on/standby) key again.
3 Unplug the AC power cord from the wall outlet after the fan has stopped running and the
ON/STANDBY indicator has lit in red.
Notes
• Do not unplug the AC power cord while the fan is still running. Doing this may cause damage to the
unit. (VPL-ES2 only)
• The internal circuitry of the Off & Go function may cause the fan to continue to operate for a short
time even after the I/1 key is pressed to turn off the power and the ON/STANDBY indicator changes
to red. (VPL-CS7 only)
2
2
TILT
1
1
2
2
3
3
Focus
Zoom
3
3
7
GB
Projecting