Adjusting The Projector; Turning Off The Power - Sony VPL-DX10 Kurzanleitung

Adjusting the Projector

a Adjust the tilt (upper or lower position of the picture) of the projector with the
adjusters.
When you adjust the tilt with the adjusters, the V keystone adjustment is performed
automatically.
1Lift the projector while holding the Adjuster button pressed.
2Adjust the tilt of the projector.
3Release the Adjuster button.
4When fine-tuning is necessary, turn the Adjuster right and left.
To adjust the tilt manually
Press the KEYSTONE/TILT key on the Remote Commander to display the TILT menu and
adjust the tilt using the v/V/b/B keys.
b Adjust the size of the picture with the Zoom ring.
c Adjust the focus with the Focus ring.
2

Turning off the Power

1
Press the ?/1 key.
2
When a message appears, press the ?/1 key again.
3
Unplug the AC power cord from the wall outlet after the fan has stopped
running and the ?/1 key has lit in red.
14
GB
Projecting
2
3
3
v/V/b/B
1
1
13
4
2
INPUT NETWORK USB
MENU
RESET
1
1
AUTO FOCUS LENS
D ZOOM VOLUME
KEYSTONE
/TILT
APA
ENTER
KEYSTONE
/TILT
PIC MUTING
FREEZE AUDIO MUTING