Safety Information - Msi B360M Pro-Vdh Benutzerhandbuch

Safety Information

• The components included in this packageare prone to damagefrom electrostatic
discharge IESD) Please adhereto the following instructions to ensure successful
computer assembly.
• Ensure that all components are securely connected. Loose connectlons may cause
the computer to not recognize a component or fail to start
• Hold the motherboard by the edges to avoid touching sensitive components.
• It is recommended to wear an electrostatic discharge (ESD)wrist strap when
handling the motherboard to prevent electrostatic
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard
• Store the motherboard in an electrostatic
pad whenever the motherboard IS not installed
• Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
• DO not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
• If you need help during any installation
technician
• Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component
• Keep this user guide for future reference
• Keep this motherboard away from humidity.
• Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU. before connecting the PSU to the electrical outlet.
• Place the power cord such a way that people can not step on it. Do not place
anything over the power cord
• All cautions and warnings on the motherboard
• If any of the following situations arises. get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
• The motherboard has been exposed to moisture.
• The motherboard does not work well or you can not get it work according to
user guide.
he motherboard has been dropped and damaged.
• The motherboard has obvious sign of breakage
• Do not leave this motherboard in an environment above 600C (1400F), it may
damage the motherboard
2
Safety Information
damage. If an ESD wrist strap is
shielding container or on an anti-static
step. please consult a certified computer
should be noted