What To Do In Case Of Problems; Installing The Device; Turning On The Device - KKT KOLBE EB8016ED Benutzerhandbuch

Installation and connection of the device

What to do in case of problems?

Unqualified persons should perform the repairs on this unit
because of electric shock and short circuit hazard. Repairs ge-
nerally only be carried out by a licensed professional.
The oven doesn't heat up.
Device fuse tripped in the house installation?
Temperature controller and the function selector switch set
correctly?
The device fuse keeps blowing.
Call the KKT KOLBE Customer Service or a licensed electrici-
an.
Lighting has failed.
The replacement of lighting is described in the previous chap-
ter.
„AUTO" flashes in the display of the timer (on some
models only).
Hand button to switch the oven to manual operation.
I'm not satisfied with the baking results.
The hints and tips have been followed in this manual?

Installing the device

• The stability of the furniture must comply with DIN 68930.
• On the built-in niche no back wall may be present, so that
the ventilation is ensured.
• Push the device all the way into the niche.
• Open the oven door and fasten the left and right with the
supplied four screws and sleeves on the cabinet. Do not
overtighten the screws.

Turning on the device

• Remove all packaging materials and possibly remove pro-
tective films.
• Clean the oven and the accessories just moist.
• Set the current time to the timer (on some models only).
• Operate the empty oven for about 30 minutes with top
and bottom heat and maximum temperature. The resul-
ting typical smell of a brand is unavoidable. Please ven-
tilate the room.
38
!