Werbung
Verfügbare Sprachen
Verfügbare Sprachen
be hidden in hedges or bushes and can be
accidentally cut by the blade.
g) Do not use the hedge trimmer in bad
weather conditions, especially when there
is a risk of lightning. This decreases the risk
of being struck by lightning.
h) Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an
authorised repairer.
i) Keep your hands and feet away from the
cutting area at all times.
j) Always hold the trimmer at a safe distance
from the body.
k) Always wear protective goggles.
l) Always wear gloves.
m) Only use the trimmer in daylight.
n) Ensure the ventilation openings are clear of
debris at all times.
o) Ensure there are no people of animals
within 5 metres of your trimming area.
2. MACHINE INFORMATION
Intended use
This hedge trimmer is only intended for cutting
branches from shrubs, bushes, ornamental plants
and hedges.
TECHNICAL SPECIFICATIONS
Model No.
Rated voltage
Rated Power
No load speed
Cutting length
Cutting capacity
Blade length
Sound pressure level L
PA
Sound power level L
WA
Vibration value:
Front handle A
h
Rear handle A
h
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given
in EN 62841-1 and EN 62841-4-2; it may be
used to compare one tool with another and
as a preliminary assessment of exposure to
vibration when using the tool for the applications
mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Cutting blade
2. Transport protection
3. Protection guard
4. Safety switch
5. On/Off button
6. Cable strain relief
3. ASSEMBLY
Using the cord grip (Fig. C)
To help secure the plug to the extension cord,
HTM1007
make a loop in the extension cord and attach it to
230V~ 50Hz
the cord grip as shown (see Fig. C). Once secure,
450W
attach the cord to the plug. This will prevent
1.700/min.
accidental 'pull-out'.
410mm
15mm
Note: We recommend the use of a heavy-duty
450mm
outdoor extension cable.
91.1dB(A) K=3dB
102.1dB(A) K=2.08dB
4. OPERATION
4.6m/s
K=1.5m/s
2
2
3.7m/s
K=1.5m/s
2
2
Using your hedge trimmer
• For your own safety and for best results read
the following user advice and do not use this
Before using, always visually inspect to
see that the blades, blade bolts and cutter
assembly are not worn or damaged.
Always use both hands to hold the
hedge trimmer and keep it away from
your own body.
7
Werbung
